Products
Fuel Powered Empty Container Handler
Maximum Stacking Layers
6/7/8
Rated load
9t
Wheel base
4550mm
Applicable Place
Ports, Docks
The TCH90 series empty container handler is primarily designed for ports, terminals, yards, and other locations to handle the loading, unloading, transfer, and stacking of 20' or 40' standard empty containers. The machine incorporates multiple core technologies, including anti-overturning safety protection, automatic fire suppression, and load-sensing systems. With its exceptional safety and operational performance, it ensures your operations proceed steadily and efficiently.
HIGH ENERGY
• Pedestrian Recognition + Reverse Assist Braking System
• Pipeline-type automatic fire suppression system
• Dynamics simulation and FEA reinforce high-stress areas, enhancing overall structural strength.
EFFICIENT
• Smart Decision-Making Anti-Overturning Protection: Ensures safe and highly efficient operation.
• Automated Fault Detection and Real-Time Data Display: Provides instant diagnostics and system status.
• Automatic Reverse Braking System: Activates alerts and initiates braking automatically when reversing.
• Professional Cooling System: Features separated hot and cold air channels, increasing heat dissipation efficiency by 10%.
• CAN Bus Control Technology: Offers strong interference resistance and fast response times.
SAFETY
• Load-sensing system delivers power on demand, eliminating excess flow for reduced energy consumption.
• Adaptive matching technology that automatically optimizes the powertrain and hydraulic systems for different working conditions.
• Ultra-low emission, energy-efficient, and environmentally friendly power source is equipped as standard.
TECHNICAL PARAMETER
| Parameter | Unit | TCH90K7 Series | ||
| Overall weight | t | 40 | ||
| Lifting Performance | Rated Load Capacity | t | 9 | |
| Maximum Stacking Layers | - | 7 (8’6”) With the option of 6 or 8 layers | ||
| Maximum Lifting Height | mm | 18750 | ||
| Operational Parameters | Maximum Lifting Speed (Unloaded/Loaded) | mm/s | 600/550 | |
| Maximum Lowering Speed (Unloaded/Loaded) | mm/s | 550/600 | ||
| Overall Dimensions | Overall Length | mm | 6900 | |
| Wheelbase | mm | 4550 | ||
| Load Center Distance | mm | 1220 | ||
| Front Overhang | mm | 1250 | ||
| Overall Height (Lowest/Highest Mast Position) | mm | 10920/19170 | ||
| Minimum Ground Clearance (Unloaded) | mm | 330 | ||
| Min. hoisting Height | mm | 2205 | ||
| Cab Top Height | mm | 4735 | ||
| Overall Width (Spreaded Retracted/Spreaded Extended) | mm | 6085/12215 | ||
| Front Wheel Distance | mm | 3280 | ||
| Rear Wheel Distance | mm | 2165 | ||
| Mast Tilt Angle (Forward/Backward) | ° | 2/4 | ||
| Minimum Outside Turning Radius | mm | 6000 | ||
| Aisle Width for 20’Container | mm | 9955 | ||
| Aisle Width for 40’ Container | mm | 14585 | ||
| Power Performance | Maximum Travel Speed (Unloaded/Loaded) | km/h | 28/26 | |
| Gradeability (Unloaded/Loaded) | % | 30/22 | ||
CONFIGURATION PARAMETER
| Parameter | Unit | TCH90K7 Series | ||||
| Model | - | CUMMINS QSB 6.7 | CUMMINS QSB 6.7 | |||
| Engine | Rated Power | kW/rpm | 164/2300 | 168/2200 | ||
| Rated Torque | Nm/rpm | 949/1400 | 1044/1500 | |||
| Emission Standard | - | Stage Ⅲ | Stage IV | |||
| Gearbox | Model | - | DANA 340TE17312 | |||
| Type | - | Electronically Controlled Power Shift Transmission with Torque Converter | ||||
| Operation Method | - | Electro-hydraulic Control | ||||
| Drive Axle | Model | - | Fuwa WF0477A0/ KESSLER D81 | |||
| Spreader | Model | - | TS90 | |||
| Side-Shifting Distance | mm | ±600 | ||||
| Self Weight | kg | 4400 | ||||
| Applicable Range | - | ISO 20’/40’containers | ||||
| Tire | Front Wheel /Quantity | - | 14.00-24 28PR/4 | |||
| Rear Wheel /Quantity | - | 14.00-24 28PR/2 | ||||
| Tire Pressure | Mpa | 1.05 | ||||